*Approved for use in organic production or food processing and handling.
Direction For Use
- Ensure surfaces are washed clean before sanitising.
- Apply DX50 Sanitiser by spraying, immersing, soaking, brushing, wiping or fogging as required.
- For general surface sanitising, mix DX50 Sanitiser at 1Lto 100L clean water.
- For high risk areas mix DX50 Sanitiser at 1L to 40L water.
- For sanitising internal pipework: 60-100ml DX50 Sanitiser / 100L water.
Reticulate through plant for a minimum 5 minutes. Open plant and allow to drain.
NOTE: DX50 Sanitiser is effective at oxidising Iron and Manganese and removing them from
solution. Therefore it is recommended that a water test be undertaken to determine mineral
levels to avoid precipitation.